HP RELIABLE HPE6-A85 VALID STUDY PLAN–PASS HPE6-A85 FIRST ATTEMPT

HP Reliable HPE6-A85 Valid Study Plan–Pass HPE6-A85 First Attempt

HP Reliable HPE6-A85 Valid Study Plan–Pass HPE6-A85 First Attempt

Blog Article

Tags: HPE6-A85 Valid Study Plan, Exam HPE6-A85 Learning, HPE6-A85 Exam Cram Questions, Valid HPE6-A85 Test Notes, HPE6-A85 New Question

DOWNLOAD the newest VCE4Dumps HPE6-A85 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ZOwNq5m1fIWXsrUfYUmrbHh_A476ex0Y

Through many people complain that it is hard for searching a job. But If you get an excellent certification (with HPE6-A85 new test collection materials), you may be took as a skilled engineer. There is increasing demand for all kinds of senior R & D engineer in each link of internet, website, soft, App. HP HPE6-A85 new test collection materials will be a stepping-stone to success; you will have a good job with good prospects for development.

HP HPE6-A85 certification exam is designed for those individuals who want to demonstrate their expertise in Aruba Campus Access Solutions. It is an associate level certification exam that is specifically designed for network professionals who are responsible for designing, implementing, and managing enterprise wireless LANs and other mobile solutions. HPE6-A85 exam is designed to test the candidate's knowledge and skills in various areas such as Aruba architecture and features, WLAN design, implementation, and troubleshooting.

The Aruba Campus Access Associate Exam is a performance-based exam that assesses the candidate's ability to configure and troubleshoot Aruba network solutions. HPE6-A85 Exam comprises of 60 multiple-choice questions and lasts for 90 minutes. Candidates who pass the exam receive the Aruba Certified Switching Associate (ACSA) certification, which is valid for three years.

>> HPE6-A85 Valid Study Plan <<

Exam HPE6-A85 Learning - HPE6-A85 Exam Cram Questions

HPE6-A85 Preparation materials will be the good helper for your qualification certification. We are concentrating on providing high-quality authorized HPE6-A85 study guide all over the world so that you can clear exam one time. HPE6-A85 reliable exam bootcamp materials contain three formats: PDF version, Soft test engine and APP test engine so that our products are enough to satisfy different candidates' habits and cover nearly full questions & answers of the real test.

HP Aruba Campus Access Associate Exam Sample Questions (Q96-Q101):

NEW QUESTION # 96
Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

  • A. ip route 0.0 0 0/0 10.4.5.1
  • B. ip route 0 0 0.070 10.4 5.1 vrf mgmt
  • C. default-gateway 10.4.5.1
  • D. iP default-gateway 10.4.5.1

Answer: A

Explanation:
Explanation
The command that is used to set a default route to 10.4.5.1 on an Aruba CX switch when in-band management using an SVI is being used is ip route 0.0 0 0/0 10.4.5.1 . This command specifies the destination network address (0.0 0 0) and prefix length (/0) and the next-hop address (10.4.5.1) for reaching any network that is not directly connected to the switch. The default route applies to the default VRF Virtual Routing and Forwarding.
VRF is a technology that allows multiple instances of a routing table to co-exist within the same router at the same time. VRFs are typically used to segment network traffic for security, privacy, or administrative purposes. , which is used for in-band management traffic that goes through an SVI Switch Virtual Interface.
SVI is a virtual interface on a switch that allows the switch to route packets between different VLANs on the same switch or different switches that are connected by a trunk link. An SVI is associated with a VLAN and has an IP address and subnet mask assigned to it
https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-6200/Content/Ch
2
https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-6200/Content/Ch


NEW QUESTION # 97
After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core You ask your colleague to verify the connection is plugged in and the switch is powered on They confirm that both are correct You attempt to ping the core switch and confirm that the ping is failing.
Knowing the nature of this deployment, what commands might you use to troubleshoot this issued

  • A. diagnostic diag cable-diag 1/1/51 diag cable-diag 1/1/52 - to view diagnostic information for the physical link to get a status on any interruptions to Layer 1 connectivity, show ip route - to verify that the default gateway is present in the routing table show ip ospf - to check whether there is a layer 3 routing protocol enabled show ip dns - to view whether there is a valid dns source
  • B. Show run - to view the running configuration of the switch Show run | begin 20 "vlan 20" - to ensure VLAN 20 was correctly added to the database show run | begin 20 'interface vlan 20' - to view the L3 SVI configuration Show run interface 1/1/51.1/1/52 - to ensure the physical interfaces are no shut and were added as members of LAG 1 Show run int lag 1 - to verify LACP mode active was configured to eliminate LACP blocking states
  • C. Ping 10.11 1 - ping the core to attempt to verify connectivity Show trunk - to verify if the LAG interface was correctly added to the switch Show spanning tree - to check for spanning-tree blocked states Show port-access clients interface all - to view any port-access blocking states or failed authentication attempts on all interfaces Show run interface vlan20 - to double check the layer 3 svi configuration is correct for l_3 connectivity Show lldp neighors - to verify whether you are able to see the Core as an L2 neighbor to verify if the correct links are plugged in to the correct ports
  • D. Ping 10.1.1.1 - ping the core to attempt to verify connectivity show lacp agg - to verify which link aggregations are currently configured using which physical ports show lacp int - to verify the LACP status and whether any links are blocking in your topology show lldp neighors - to verify whether you are able to see the Core as an L2 neighbor to verify if the correct links are plugged in to the correct ports show run interface 1/1/51.1/1/52-to ensure the physical interfaces are no-shut and members of the lag show run interface lag 1 - to ensure the correct vlan trunking configuration is applied to the logical interface show run int vlan 20 - to ensure you have the L3 SVI no shut and configured in the correct subnet

Answer: D

Explanation:
These commands might help troubleshoot this issue as they check various aspects of the connectivity between the edge switch and the core switch, such as Layer 3 reachability, Layer 2 adjacency, LACP configuration and status, VLAN trunking configuration, and interface status.References:https://www.arubanetworks.com
/techdocs/AOS-CX_10_04/CLI/GUID-8F0E7E8B-0F4B-4A3C-AE7F-0F1B5A7F9C5D.html


NEW QUESTION # 98
Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?

  • A. Airwave
  • B. Client Wave
  • C. Client Match
  • D. AirMatch

Answer: D

Explanation:
AirMatch is a feature that provides centralized RF planning and optimization service for Aruba wireless networks. It uses cloud-based algorithms and machine learning to optimize the RF performance and user experience. Reference: https://www.arubanetworks.com/assets/ds/DS_AirMatch.pdf In Aruba networks, the recommended Virtual Switching Framework (VSF) topologies include the daisy chain plus Multi-Active Detection (MAD) and the ring topology. The daisy chain topology with MAD provides a straightforward and effective way to connect multiple switches in a series while ensuring there is a mechanism in place (MAD) to detect and handle situations where more than one switch in the VSF might become active simultaneously. The ring topology offers redundancy by creating a looped connection pattern among the VSF members, enhancing network resilience and reliability.


NEW QUESTION # 99
When would you bond multiple 20MHz wide 802.11 channels?

  • A. To utilize high gain omni-directional antennas
  • B. To decrease the Signal to Noise Ratio (SNR)
  • C. To increase throughput between the client and AP
  • D. To provision highly available AP groups

Answer: C

Explanation:
Bonding multiple 20MHz wide 802.11 channels is a technique to create a wider bandwidth channel that supports higher data rate transmissions. It can increase the throughput between the client and AP by using more spectrum resources and reducing interference. Reference: https://ieeexplore.ieee.org/document/9288995 Bonding multiple 20MHz wide 802.11 channels is a technique used to increase the throughput between the client device and the Access Point (AP). By combining two or more 20MHz channels into a wider channel (e.g., 40MHz, 80MHz, or even 160MHz), the data carrying capacity and, consequently, the overall throughput of the wireless connection are increased. This method is particularly useful in high-bandwidth applications or environments where higher data rates are required.


NEW QUESTION # 100
DRAG DROP
Match the Open Systems Interconnection (OSI) layer with its comparable member of the TCP/IP stack.
(Options may be used more than once.)

Answer:

Explanation:


NEW QUESTION # 101
......

The Aruba Campus Access Associate Exam (HPE6-A85) PDF format, desktop practice test software, and web-based practice test software, all three formats of actual exam questions are ready for quick download. You just need to pay the affordable HP HPE6-A85 Exam Questions charges and click on the download button. Get them now and start Aruba Campus Access Associate Exam (HPE6-A85) exam preparation today.

Exam HPE6-A85 Learning: https://www.vce4dumps.com/HPE6-A85-valid-torrent.html

P.S. Free 2025 HP HPE6-A85 dumps are available on Google Drive shared by VCE4Dumps: https://drive.google.com/open?id=1ZOwNq5m1fIWXsrUfYUmrbHh_A476ex0Y

Report this page